| View previous topic :: View next topic |
| Author |
Message |
gemp
Joined: 19 Aug 2005 Posts: 31
|
Posted: Fri Aug 19, 2005 12:04 pm Post subject: Some keys on the keyboard not working |
|
|
Q: Why some keys on my master keyboard don't work?
A: The mapping of the keys depends on the slave keyboard configuration. For example: on a PowerBook there is no Command-Key at the right of the spacebar, therefore it will not be recognized if you use it on the master keyboard. |
|
| Back to top |
|
 |
moonmoon Guest
|
Posted: Fri Aug 03, 2007 4:14 pm Post subject: |
|
|
| buy a new keyboard. |
|
| Back to top |
|
 |
george12
Joined: 14 Sep 2009 Posts: 3
|
Posted: Mon Sep 14, 2009 1:43 pm Post subject: Most keys don't work |
|
|
As soon as I upgraded to 1.0.2, most keys don't work on the controlled Mac.
Before the upgrade everything was fine!
I did not change anything else. Just the teleport upgrade to both Macs.
(the one is a PPC & the other is an Intel, if that helps. again, b4 the upgrade everything was OK) |
|
| Back to top |
|
 |
george12
Joined: 14 Sep 2009 Posts: 3
|
Posted: Mon Sep 14, 2009 1:52 pm Post subject: note on above |
|
|
| The PPC has 1.0.1, the Intel has 1.0.2 |
|
| Back to top |
|
 |
george12
Joined: 14 Sep 2009 Posts: 3
|
Posted: Mon Sep 14, 2009 2:01 pm Post subject: Solution |
|
|
(sorry for the 3 posts)
As soon as I replaced the 1.0.2 at the Intel Mac with the 1.0.1 from the PPC, everything was back at normal as before...
Something looks wrong with your 1.0.2 upgrade... |
|
| Back to top |
|
 |
aburnham
Joined: 14 Sep 2009 Posts: 1
|
Posted: Mon Sep 14, 2009 10:42 pm Post subject: me too |
|
|
| I have the same problem as george12 and going back a version solved my problem too. |
|
| Back to top |
|
 |
|